High Temperature Grease

Ejector Pin Grease from Slide Products

Ejector pins grease is essential to preserve the life of your injection molding tools.

Available in aerosol and non-aerosol formulations, Slide Super Grease is a colorless, odorless, paintable, NSF-certified (food-grade) ejector pin grease that operates at high temperatures without melting. Super Grease works well with injection molds, mold assemblies, and especially medical and food-grade plastics. Read More...

Super Grease is ideal for medical applications (NSF-certified) and will not melt and bleed out into the mold cavity. It also has excellent dielectric strength.

Prevent Ejector Pin Problems
To prevent galling, seizing and pitting caused by thermal and viscosity breakdown, ejector pins must be carefully maintained using the right grease, applied correctly. The wrong grease or improper application can damage a tool and cause bleed-out onto the tool surface – which can lead to defective plastic parts.

How To Apply Right Ejector Pin Grease
Slide Super Grease for ejector pins is available in both aerosol and non-aerosol formulations to make application easy and effective. It will hold up in the heat, help prevent galling and when properly applied, will provide maximum lubricity without part marking.

Slide recommends a two-part process:

Part 1: Completely coat the back 90% of the pin with ejector pin grease. For high speed applications be sure to use a product with operating temperature of up to 650ºF (343ºC).

Part 2: Apply Heavy-Duty 10% mold release on the remaining portion of the pin, which ensures release of the parts it touches so that grease will not contaminate parts. If your ejector pin is not keyed for a specific orientation, you should be able to rotate it when the ejector plates are fully forward.

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS

For additional lubrication behind the mold, such as on the ejector plate, use a high load-bearing, high temperature aerosol grease, such as Slide Super Grease aerosol.

Slide ejector pin grease products include:

  • Slide Super Grease (No. 43911P): High-temperature, colorless, odorless, paintable, NSF-certified Category H1 aerosol spray ideal for mold assemblies used in the food and medical market.
  • Super Grease Non-Aerosol (43900): High-temperature, colorless, odorless, paintable, NSF-certified Category H1 non-aerosol grease ideal for mold assemblies used in the food and medical market.

Read Less...

Super Grease, Clear, High Temperature (No. 439)

Aerosol

Paste

#439

Super Grease, Clear, High Temperature

  • NSF category H1
  • Ideal for mold assemblies used in the food and medical space
  • NLGI #2 high temperature grease

Technical Tips and Helpful Hints Newsletter

Subscribe to our monthly newsletter for time-saving tips to help you maximize productivity in your molding process.

REQUIRED

REQUIRED

REQUIRED

Upon signing up, we'll send you a digital package of our popular best practices documents. We hope you enjoy, and you can unsubscribe at any time.

Auto Robot Detection Failed.
Please check the box.

REQUIRED

Cancel

Thank You!