BUY NOW

Mold Release, Cleaner & Rust Preventive White Papers

Back to more tips

Aerosol vs. Bulk: Which Is the Best Way to Spray?

Aerosol vs. Bulk

There are two general methods of packaging any chemical formulation: aerosol and bulk (liquid). While how the product works may be similar, the methods of delivery offer different advantages.

Aerosol is the perfect formulation

Aerosol products, by their very nature, are designed to be portable. They can be easily transferred from one workstation to another. Aerosols also offer the highest level of atomization resulting in a very fine mist containing extremely small droplets of the product. Product is applied to the mold surface with a very light and even coating providing maximum functionality of the product. And finally, the contents of an aerosol product will stay in solution throughout the life of that can, ensuring that the last spray works like the first.

Bulk is the most economical

The primary advantage of using a bulk or liquid chemical formulation is the potential cost savings as compared to an aerosol spray. But you need to keep in mind that extra spray and application equipment may be needed to effectively use a bulk formulation. While the aerosol product is ready right out of the box, a bulk item must be part of a system to both atomize and deliver the product to the desired surface.

A final point to consider is the potential for that mixture to separate and change during periods of non-use. Allowed to sit undisturbed for an extended period of time, any oils and other heavy ingredients may separate from the carrier solvents and fall to the bottom of the storage container. Agitation may be required to ensure that the mixture returns to its intended state.

If you decide that a bulk or liquid product is right for your operations, Slide provides most of our products in 1, 5, and 55-gallon containers. We Slide offer a number of delivery systems to help make usage easier and more efficient. These items include:

  • A simple Pump Sprayer and Bottle (item # 42300). This is a trigger-type, hand pumped sprayer with a polyethylene bottle to hold the liquid product.
  • The Slide Charge-It! (item # 43600) is a hand-held refillable and rechargeable canister designed to make using a liquid product work similarly to a standard aerosol item. The canister is filled with the liquid product and then topped off with up to 150 psi of compressed air. The addition of the high-pressure air serves as the propelling mechanism to both aid with the atomization of the liquid and the dispensing of the product. The Slide Charge-It! is refillable once the air pressure or the volume of liquid product runs down, thus making it a reusable item designed to make using a bulk item more efficient.
  • The Slide Air-O-Spray (item # 42202) is a hand-held spray unit designed to remain connected to your plant’s compressed air system. A thumb trigger activates the sprayer that employs the compressed air as a propelling mechanism.

Test Slide Before You Buy

Using an effective processing aid like those offered by Slide will help to increase your manufacturing efficiency and decrease your overall costs. We fully encourage you test out our products. The best way for you to know that the Slide products are as good as we say they are is to get them in your operations. Trial Samples of all Slide products are available online at www.slideproducts.com. And unlike many other companies offering these processing aids, Slide Products has an extensive network of local distributors available to aid you with your product selection. If you are interested, please email your request to Slide Products.

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS