Food-Grade Mold Releases

Home / FOOD-GRADE Compliance / Food-Grade Mold Releases

Mold Release Agents & Sprays from Slide Products

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS

EconoMIST Mold Release (No. 416)

Aerosol

Liquid

#416

EconoMIST Mold Release
  • NSF category M1
  • Recognized by UL
  • Light-duty silicone release
Pure Eze Mold Release (No. 457)

Aerosol

Liquid

#457

Pure Eze Mold Release
  • Food-grade active ingredient (†††)
  • Neutral white oil-based release; does not contain lecithin
  • Recognized by UL
Knock Out Mold Release (No. 466)

Aerosol

Liquid

#466

Knock Out Mold Release
  • Paintable, non-silicone
  • Approved for indirect food contact (†)
  • Solvent-free dry formulation
Econo-Spray® 1 Mold Release (No. 405)

Aerosol

Liquid

#405

Econo-Spray® 1 Mold Release
  • Food-grade for indirect food contact (†)
  • Non-paintable silicone
  • Recognized by UL
Econo-Spray® 3 Mold Release (No. 408)

Aerosol

Liquid

#408

Econo-Spray® 3 Mold Release
  • Non-silicone and paintable
  • Food-grade active ingredient (†)
Silicone Mold Release (No. 401)

Aerosol

Liquid

#401

Silicone Mold Release
  • Food-grade for indirect food contact (†)
  • Recommended for food-packaging molding
  • Recognized by UL
SSL Mold Release (No. 421)

Aerosol

Liquid

#421

SSL Mold Release
  • NSF category M1
  • Recognized by UL
  • Low-cost heavy-duty mold release
Heavy-Duty 10% Mold Release (No. 549)

Aerosol

Liquid

#549

Heavy-Duty 10% Mold Release
  • Paintable, non-silicone
  • Food-grade for indirect food contact (†)
  • Slide’s heaviest-duty mold release
Quick Silicone Mold Release (No. 446)

Aerosol

#446

Quick Silicone Mold Release
  • Recognized by UL
  • Food-grade for indirect food contact (†)
  • Fast-drying on cold and hot molds
Quick Lecithin Mold Release (No. 448)

Aerosol

#448

Quick Lecithin Mold Release
  • Paintable, non-silicone mold release
  • Food-grade active ingredient (††††)
  • Fast-drying on cold and hot molds
Universal Mold Release (No. 426)

Aerosol

Liquid

#426

Universal Mold Release
  • Non-silicone, paintable mold release
  • Food-grade active ingredient (†††)
  • Recognized by UL
E/S Silicone Mold Release (No. 443)

Aerosol

#443

E/S Silicone Mold Release
  • Approved for indirect food contact (†)
  • Water-based formulation

Follow Slide Products

Technical Tips and Helpful Hints Newsletter

Subscribe for mold care and time-saving tips to help you maximize productivity

REQUIRED

REQUIRED

REQUIRED

Auto Robot Detection Failed.
Please check the box.

REQUIRED

Cancel

Thank You!

TOP