Mold Releases

Mold Release Agents Sprays from Slide Products

The right mold release agent increases production capability and extends the life of your molds, with shortened cycle times that go straight to your bottom line. Material and application-specific formulations that prevent sticking and enable the speedy release of defect-free parts to drive greater productivity for injection molding or blow molding. Read More...

When properly applied to the mold surface, Slide’s aerosol spray mold release agents easily release a variety of plastic resins across many applications, including food and medical. The epoxy release agent creates a barrier between the mold and the resin, preventing the two from sticking together and potentially destroying the mold.

How Mold Releases Increase Your Productivity
Silicone mold release agents have been a staple in the molding industry for over 60 years. With improved technology and mold design, sticky parts are no longer the status quo in an industry that has undergone significant evolution, but mold release agents still play a key role in improving cycle times, speeding the ejection of sticky parts and maximizing the life of your molds.

Further into their life cycle, molds can develop issues that don’t affect the part finish or quality but that slow the ejection process and lengthen cycle times. A mold release spray may help extend the life of your mold before it requires significant maintenance or repairs.

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS

Finding the Right Mold Release
Slide mold release agents are available as aerosol sprays and bulk liquids, in a variety of formulations for engineered resins, thermosets, epoxies, and deep draw molding. From light duty to heavy duty, food-grade and NSF-certified, medical part molding, paintable, non-silicone, specialty releases and mold releases for investment wax castings, Slide’s array of high-quality formulations ensures the best results for every application.

Slide best-selling mold release products include:

EconoMIST Mold Release Agent Spray (41612N): NSF-certified mold release agent delivers a solvent-free, dry, light silicone spray to improve part release and help optimize cycle time
Paintable Mold Release Agent Spray (40012N): a paintable mold release permits post-molding painting or decorating
Pure Eze Mold Release Agent Spray (45712N): a food-grade, neutral white oil-based mold release that is non-silicone based and does not contain lecithin
Econo-Spray 1 Mold Release Agent Spray (40510P): an economical, food-grade, non-paintable, silicone oil-based mold release recognized by UL

Read Less...

Aerosol

Liquid

#416

EconoMIST Mold Release

NSF category M1
Recognized by UL
Light-duty silicone release

Aerosol

Liquid

#400

Paintable Mold Release Agent

Allows molded parts to be painted or decorated post-molding
Light-duty mold release

Aerosol

Liquid

#457

Pure Eze Mold Release

Food-grade active ingredient (†††)
Neutral white oil-based release; does not contain lecithin
Recognized by UL

Aerosol

Liquid

#466

Knock Out Mold Release

Paintable, non-silicone
Approved for indirect food contact (†)
Solvent-free dry formulation

Aerosol

Liquid

#405

Econo-Spray® 1 Mold Release

Food-grade for indirect food contact (†)
Non-paintable silicone
Recognized by UL

Aerosol

Liquid

#407

Econo-Spray® 2 Mold Release

Paintable
Permits post-decorating of molded parts without prior cleaning

Aerosol

Liquid

#408

Econo-Spray® 3 Mold Release

Non-silicone and paintable
Food-grade active ingredient (†)

Aerosol

Liquid

#458

Urethane Mold Release

Non-paintable silicone mold release
Effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams

Aerosol

Liquid

#401

Silicone Mold Release

Food-grade for indirect food contact (†)
Recommended for food-packaging molding
Recognized by UL

DFL Dry Film Lube Mold Release (No. 411)

Aerosol

Liquid

#411

DFL Dry Film Lube Mold Release

Formulated for deep draw molds
Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl

Aerosol

Liquid

#421

SSL Mold Release

NSF category M1
Recognized by UL
Low-cost heavy-duty mold release

Aerosol

Granular

#410

Zinc Stearate Mold Release

Non-silicone, paintable mold release
Mold release powder
Use for polycarbonate, polypropylene, polysulfone and rubber molding

Aerosol

Liquid

#406

Epoxease Mold Release

Non-silicone, synthetic wax-based product
For epoxy, polyester and phenolic resins
For injection molding, encapsulating, potting

Aerosol

Liquid

#549

Heavy-Duty 10% Mold Release

Paintable, non-silicone
Food-grade for indirect food contact (†)
Slide’s heaviest-duty mold release

Aerosol

#446

Quick Silicone Mold Release

Recognized by UL
Food-grade for indirect food contact (†)
Fast-drying on cold and hot molds

Quick Paintable Mold Release Agent (No. 447)

Aerosol

#447

Quick Paintable Mold Release Agent

Paintable mold release
Fast-drying on cold and hot molds

Aerosol

#448

Quick Lecithin Mold Release

Paintable, non-silicone mold release
Food-grade active ingredient (††††)
Fast-drying on cold and hot molds

Aerosol

Liquid

#414

Polycarbonate Mold Release

Paintable release, will not interfere with post-molding decorating of parts
Specifically developed as a release for polycarbonate resin
Recognized by UL

Aerosol

Liquid

#426

Universal Mold Release

Non-silicone, paintable mold release
Food-grade active ingredient (†††)
Recognized by UL

Aerosol

#443

E/S Silicone Mold Release

Approved for indirect food contact (†)
Water-based formulation

Aerosol

#454

Thermoset Mold Release

Made with synthetic carnauba wax
Contains no silicones or oils
Recommended for thermoset plastic resins

LMR Lecithin Mold Release Concentrate (No. 435)

Liquid

#435

LMR Lecithin Mold Release Concentrate

Solvent-free formulation
100% Lecithin oil concentrate
Paintable, non-silicone mold release
Food-grade active ingredient (†)
Direct food additive
Maximum operating temp: 500°F/260°C
† 21CFR 184.1400 (GRAS)

Aerosol

#441

Hi-Temp 1800 Mold Release

Paintable, non-silicone release contains boron nitride
Effective release for engineering grade resins, low melting point metals and glass
Recommended for use with Ultem and other engineering-grade resins