BUY NOW

August 17th, 2022

To preserve the life of your injection molding tools, proper lubrication of ejector pins is key. Nobody should have to clean and scrape for hours, losing valuable production time and risking damage to machinery. The wrong lubricant or poor maintenance procedures may lead to galling, seizing and pitting, not to mention the likelihood of defective parts. Correctly choosing and applying the right emollient can solve all of these possible negative outcomes. 

Super Grease from Slide Products should have its own superhero series. This “marvel-ous” product is saving the plastic processing industry from costly loss of time and revenue, swooping in with just the right attributes before a less effective grease can cause those types of problems. It can’t fly, it doesn’t have X-ray vision, but it has a variety of “powers” that make this lubricant the ideal solution.
 

Fighting Contamination:

Using an inferior grease can cause pins to build up heat and potentially seize up inside a mold. This risk is not worth the life span of your injection molding tools. With an operating temperature of -45°F - +650°F, Super Grease is sure to “beat the heat” and stays in place without melting and running.
 

Eliminating Discoloration:

Some grease formulas contain colors that can cause discoloration of parts, especially when used at a higher temperature. Super Grease is a paintable, clear and colorless answer to this frustrating issue. Bleed out no more!
 

Saving Production Time and Costs:

While all of Slide’s products are designed to save you valuable time and money, this particular mix is an essential remedy. Avoid premature replacement of molds and machines by utilizing the right lubricant.
 

Strong Properties:

Expertly developed Slide Products Super Grease, will provide the results you need. Thixotropic properties offer exceptional mechanical stability when rapid temperature changes occur, in addition to repelling water and preventing corrosion. This non-yellowing, safe formula works well for use with injection molds, mold assemblies, and especially medical and food grade plastic parts (NSF certified for food environments, FDA approved, USDA rated and listed as an H1 formula).


Super Grease is available in aerosol and non-aerosol selections that include 14-oz. tubes (standard grease gun), 3-oz. tubes, 7-lb. cans, 35-lb. cans and 400-lb. drums. As with most of Slide’s products, free samples are available.

Do not fear... Super Grease is here!

 

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS

Technical Tips and Helpful Hints Newsletter

Subscribe for mold care and time-saving tips to help you maximize productivity

REQUIRED

REQUIRED

REQUIRED

Auto Robot Detection Failed.
Please check the box.

REQUIRED

Cancel

Thank You!