Purging Compounds

Purging Compounds from Slide Products Stop Specks & Streaking

If you’re running pounds of resin through the barrel and mold until it comes out clean, this wasteful process will cost you time and create decreased profit margins. The right purging compound will turn much of that unwelcome expense back into output. Slide’s purging compounds speed up resin-to-resin and color-to-color changes, maximizing your productivity and decreasing the costs. Read More...

There are typically two (2) types of purging compounds:

1) Mechanical
2) Chemical

Mechanical
A mechanical purging compound is effective for numerous applications. As the name suggests, mechanical purging relies on shear force and the differences in viscosity to clean molds. There is no chemical reaction and no soak time needed to purge the molding machine.

Chemical
A mechanical purge may not be effective in sections of the barrel, screw, or manifolds where there is low pressure. In such cases, a chemical purge is the best choice for cleaning. Instead of shear force, a chemical reaction takes place when the purge contacts the resin or carbon. Some chemical purging agents require no soak time while others require up to 30 minutes; this soak time depends on several factors, such as the resin, size of barrel and screw, manifold size, etc.

Our experts can help you
Choosing the right purging compound for your applications requires a little research and testing. Slide offers both mechanical and chemical purges, as well as a unique liquid purging compound with advantages of both mechanical and chemical purges.

It is usually best to start by contacting an expert, such as Slide Products. One way to begin is to use our online calculator to help you calculate the true cost of your current purging procedure. With multiple purge compounds and years of experience tackling tough purging applications, Slide’s team can help you find the right product for your purging problem and help you start re-capturing purge time and turn it back into time spent molding. You can contact us here, or use the online scheduler to set up a free purging consultation.

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS

Slide Products offers trial quantities for testing a purge and often will send a technician to help processors fine tune your purging process and trim even more time off the purge cycle.

A few of Slide’s best-selling purging compounds include:

  • Econo-Purge Purging Compound: A mechanical, low-odor, and GRAS rated compound excellent for use through hot runner systems and safe to purge through the mold. This powerful purging compound helps to remove old resin and color residue in extrusion, injection, and blow molding operations.
  • KLENZ Purging Compound: A chemical and mechanical combination polyolefin resin carrier safe for high-temperature molds exceeding 330°F. This chemically reactive compound is safe to purge through the mold and helps to eliminate color streaking and black specks.
  • PDQ Liquid Purging Compound: A highly effective mechanical/chemical hybrid, this is a concentrated liquid purging compound that can be mixed with any carrier resin to remove residue.

Read Less...

Econo-Purge Purging Compound (No. 473)

Granular

#473

Econo-Purge Purging Compound

  • Excellent purge for use through hot runner systems
  • Safe to purge through the mold
  • Helps eliminate color streaking and black specks
KLENZ Purging Compound (No. 468)

Granular

#468

KLENZ Purging Compound

  • Excellent for use through hot runner systems
  • Safe to purge through the mold
  • GRAS rated (food-grade) active ingredients safe for food packaging applications
Purge-Atory Purging Compound (No. 470)

Granular

#470

Purge-Atory Purging Compound

  • Recommended for use with gas emitting resins such as Delrin® and acetal
  • Safe to purge through the mold
  • Helps eliminate color streaking and black specks
NPT NuPurge Technology Purging Compound (No. 451)

Granular

#451

NPT NuPurge Technology Purging Compound

  • Complete purging through reactive chemistry
  • No need for multiple purging products
  • Temp range: 160° - 600°F/71°C - 315°C
  • Not for use with acetal or Delrin®
PDQ Liquid Purging Compound (No. 434)

Liquid

#434

PDQ Liquid Purging Compound

  • Concentrated liquid purging compound
  • Water-based additive (use with barrel temperature above 212’F/100ºC)
  • Can be mixed with any carrier resin
Hi-Temp Purge Compound (No. 478)

Granular

#478

Hi-Temp Purge Compound

  • Aids with purging engineering-grade resins
  • Stable at temps up to 750ºF/395ºC
  • Safely clean screws and barrels
  • Virtually no odor or smoke

Technical Tips and Helpful Hints Newsletter

Subscribe to our monthly newsletter for time-saving tips to help you maximize productivity in your molding process.

REQUIRED

REQUIRED

REQUIRED

Upon signing up, we'll send you a digital package of our popular best practices documents. We hope you enjoy, and you can unsubscribe at any time.

Auto Robot Detection Failed.
Please check the box.

REQUIRED

Cancel

Thank You!